Using MiniMax H3 locally on an RTX 3050 6GB to generate a 60-second video took 6 hours 35 minutes.
The author ran MiniMax H3 locally on an RTX 3050 6GB, generating a 60-second AI video, which took 6 hours 35 minutes.
The author ran MiniMax H3 locally on an RTX 3050 6GB, generating a 60-second AI video, which took 6 hours 35 minutes.
The author used ChatGPT to generate character images, then Wan2.2 14B to generate video, and finally Capcut to edit it into a 15-second AI short film. A total of 6 shots were generated, 5 were used, with a resolution of 1024x576px, each segment 3 seconds long, and the workflow was based on ComfyUI.
The ComfyUI workflow for MiniMax H3 Image 20MP uses Kijai's sampler/scheduler settings and produces good output. The workflow offers two modes, T2I and Edit, switched via bypass nodes. It uses the SamplerLCM node with Simple 6 steps, s_noise 1.10, s_noise_end 0.90; details still need improvement, possibly fixable via LoRA.
The author released the Geiru Window Director and Geiru Hybrid Windows workflow for single-pass rendering of MiniMax H3 long videos. Hybrid Windows renders long videos by overlapping windows, keeping VRAM usage to one window; Window Director supports per-window review, redo, and rollback, and can save each window to disk.
Why it matters: This workflow supports per-window review and hybrid rendering, providing a transferable solution to the seam and drift issues in long video generation.
Reddit user lurenjia_3x used AI to code a ComfyUI node that automatically decides which LoRAs to load based on the systemone decision model. The node also supports LoRA weight options, suitable for slider-type LoRAs. To save images, use the project's built-in Save Image node, which strips credentials from metadata.
MiniMax releases MiniMax-H3-Image, a pure image model based on the H3 video model, supporting direct generation at approximately 16 million pixels and editing with up to 16 reference images. The author tested it on an RTX 4070 Ti SUPER: 4MP generation averages about 9 seconds, 8MP about 17 seconds, and 16MP about 37 seconds. ComfyUI 0.45.0 already includes an official template. The model uses a community license and is available in regions such as Japan, but is excluded from the EU, UK, South Korea, and the US.
The author built a complete iOS app commercial production pipeline in ComfyUI: using Krea2 to generate a reference image of a coach holding a titanium phone, and using MiniMax H3 (Ref2V) to render 4 shots (each 124 frames/5.1 seconds) with camera movement and native speech synthesis.
Seedream 5.5 is now available in ComfyUI via Partner Nodes, adding multi-round local editing, native transparent RGBA output, poster and image-text layout, more realistic portraits, and prompt-based lighting control. All features are accessible through a single node in any workflow. Users can try two entry points on Comfy Cloud: image editing and text-to-image.
Why it matters: Seedream 5.5 integrates with ComfyUI via Partner Nodes, adding multi-round local editing and transparent output, allowing creators to evaluate its compatibility with existing workflows.
The MiniMax H3 video editing workflow package processes long videos using split windows and chunking, requiring ComfyUI v0.35.0 or newer. The window defaults to 124 frames (about 5.2 seconds) with 22 frames of overlap, and chunking is off by default; when chunking is enabled, each chunk is about 1 MP, and connecting a reference video allows each chunk to get a clear crop. The package also includes Long Generation and Multi Guide nodes, with example workflows in the example_workflows folder of the repository.
The author shares their experience using MiniMax H3 Image on the day of its release: the same checkpoint supports text-to-image and editing; editing requires connecting VAE; prompts should be long, describing lighting, camera, and subject position; native resolution is 4096x4096. Fuobe has provided Day 0 support, source code at https://github.com/workingprototype/Fuobe。.
The author shared the complete settings and prompts for generating realistic portrait videos with MiniMax H3 in ComfyUI, and sought improvement suggestions. The workflow first uses Krea 2 to generate a reference image, then uses MiniMax H3 Ultra on RunPod to render a 15-second fixed shot with 12 sampling steps, along with detailed prompts.
comfyui-workflow-templates v0.11.106 released to PyPI, adding LTX VFX API templates (reframe, upscale, SDR to HDR) and MiniMax-H3-Image partner API templates.
MiniMax H3 Image receives day-0 native support in ComfyUI, with a single checkpoint supporting both text-to-image and reference image editing. The model is CFG-distilled, requires 6 sampling steps and no negative prompt, natively outputs resolutions such as 4096×4096 (1:1), and supports multi-reference image editing and prompts up to 4096 tokens.
Why it matters: MiniMax H3 Image receives day-0 native support in ComfyUI, with a single model handling both text-to-image and reference image editing, 6-step sampling, and native high-resolution output, enabling creators to evaluate whether to replace their existing image generation workflows.
ComfyUI user u/Informal-Force7417 asked the community about video production, seeking recommendations for the best text-to-video and image-to-video models. The user currently uses Qwen Image 2.1 to generate images, and also asked whether additional workflows are needed, and the process for editing a 30-second video with CapCut.
The author ported the ReCaVSR one-step streaming video super-resolution model based on Wan2.2 TI2V-5B to a native ComfyUI node, supporting 4×/2× super-resolution, executing one diffusion step every 8 frames.
comfyui-workflow-templates v0.11.105 has been released to PyPI. It can be installed via `pip install comfyui-workflow-templates==0.11.105`. This update includes adjustments to the MiniMax H3 Image workflow (PR #1409).
The author benchmarked the first/last frame shot rendering time of MiniMax H3, LTX 2.5, and Wan 2.2 on an RTX 4090, and released the free node package Infinite Movie. Time grows with pixels × frames; 1088×1344 is the 24GB VRAM limit; LTX 2.5 is fastest for long clips, but the author still defaults to MiniMax H3. The node package supports generating looping movies from 1–12 images and fixes cache crashes when rendering Wan/LTX consecutively.
MOSS-Image ecosystem releases multiple updates, including new Control LoRA such as OpenPose, Lineart, Depth-map, and 461 new characters. It also launched the Character Sheet Designer workflow and Mineral Ink, Risograph style LoRA. The Fizgig trainer reduces LoRA training time to about 20 minutes.
ComfyUI tutorial uses RelayVSR and DLSS5 nodes to fix detail loss in MiniMax H3 video upscaling. Under 6GB VRAM, it can upscale a 0.7 MP video to 2K in about 7 minutes. Compared to MiniMax latent space upscaling which takes about 45 minutes, this method significantly reduces upscaling time.
Why it matters: The RelayVSR workflow shared by the author can upscale MiniMax H3 video to 2K under 6GB VRAM in about 7 minutes, providing a portable upscaling solution for users with low VRAM.
SnapRef v2a's comparison test with v1b on M1 Max shows that v2a's reference pose following is significantly enhanced; in the Base running scene, 4 out of 5 seeds turned to the front, but quantitative metrics are basically on par with v1a, and on Turbo there is still leg clothing drift, and MPS side-by-side reference images still output pure black. v2a node automatically maps 2.9B weights, no need to manually remap keys, and Base generation speed is slightly faster than v1b.
The author released a 2-step LoRA for LTX-2.5 Stage 1, reducing Stage 1 from 8 steps to 2 steps, and achieving end-to-end accelerated rendering with SoL Refiner and PrunaAI VAE decoder.
The ComfyUI port of the ReCaVSR video super-resolution model has been released. int8 quantization allows 1440p 4x super-resolution to be completed on 8GB VRAM. The model is based on Wan2.2 TI2V-5B and comes with built-in FlashDecoder streaming decoding, so long clips only increase time and disk usage. In testing, a rainy street scene from 960×480 to 3840×1920 took about 36 seconds on an RTX 4090, with the int8 file at 6.27GB and output differing from bf16 by about 48dB.
Why it matters: This ComfyUI port uses int8 quantization to compress 1440p 4x super-resolution to run on 8GB VRAM, allowing low-VRAM users to assess deployment based on this.
CreativeField is a free and open-source ComfyUI interface that integrates image generation, video, 3D, and photo editing into a single workspace. It supports generating images with FLUX or Qwen, generating videos with MiniMax H3 or HyperFlow, converting images to 3D with Hunyuan3D or TRELLIS, and includes a built-in FotoField photo editor.
The author released a custom ComfyUI long video node that breaks Viggle Remake's single-run 345-frame limit through overlapping windows and stitching. The default window is 294 frames (12.25 seconds at 24 fps); subsequent passes start from the last 17 frames of the previous pass and remain fixed, with audio split and stitched at the same intervals. The node does not detect shot cuts; seam continuity still requires manual inspection, and the source video must be 24 fps.
ComfyUI's October update brings multiple efficiency improvements including branch nodes, LoRA stacking, automatic template downloads, multi-output zip export, EXR/HDR/ProRes support, link organization, and in-widget undo/redo, all included in v0.44. Branch Node supports up to 32 inputs, LoRA stacking node supports up to 20 LoRAs, and template downloads are limited to official templates.
Why it matters: ComfyUI's October update brings multiple efficiency improvements such as branch nodes, LoRA stacking, and link organization, allowing creators to optimize workflows, reduce repetitive operations, and improve creative efficiency.
Using ComfyUI and Minimax H3 to animate a friend's painting, inspired by Van Gogh's 'The Starry Night.' The author says the work is not perfect and still has much room for improvement, but likes it very much, and invites netizens to rate it.
InvokeAI 7.0.0 enters beta 1, its largest version update. It adds projects, a single workbench, and video panel support for MiniMax H3, LTX-2.5, and Wan 2.2. Official warning: v7 database migration is irreversible; back up before upgrading.
Why it matters: InvokeAI 7.0.0 enters beta, adding projects, a video panel, and multi-model support, giving creators a basis to evaluate the upgrade.
Fizgig 9.2 was released on November 8. The time to train MOSS-Image LoRA on an RTX 5090 (94 images, batch 1, Muon, 70 epochs) was shortened from 49 minutes to about 20 minutes, and memory usage dropped from 21.7 GB to 7.1 GB.
GLITCH Studio is recruiting 1-2 technical beta testers to test its ComfyUI-based local AI filmmaking Windows application. The application supports workflows such as WAN, MiniMax H3, Krea 2, LTX 2.5, and FLUX, and has completed clean machine installation tests for FLUX image editing and LTX 2.5 video rendering.
GkoChan shared a ComfyUI workflow based on Minimax H3 for multi-character replacement, which can replace 1 to 4 characters in a single run. The workflow provides download links on Civitai and Dropbox, requires installing two custom nodes: Fizgig H3 Still and rgthree node pack, and supports character reference images, additional instructions, and preview.
MiniMax H3 Novel Pipeline is preparing to release version 2.5.1, refactoring the ComfyUI node structure and improving the character profile editing process. Updates include H3 reference budget (9 images, 3 audio files), 4-15 second scene limits, spatial continuity JSON Schema validation, and OpenAI/LM Studio backend configuration. Node logic has been separated into src/nodes/ and src/core/ for easier future maintenance and expansion.
Developer BittiAI built slopfab, a native command-line tool that lets coding agents directly generate media files, supporting models such as MiniMax H3, Krea 2, MOSS, Fibo 2.0, YuE2, and MiniMax Music3, covering video, image, and music generation. The tool can run locally on Windows/Linux, supports CUDA/Vulkan, requires no cloud or account, and can be executed remotely via SSH.
MiniMax H3 Novel Pipeline is preparing to release v2.5.1, refactoring Provider configuration and adding an OpenAI backend. Character profile integration supports editable v2 profiles, with H3 reference budget limited to 9 images, 3 audio clips, and 4–15 second scenes. The spatial continuity JSON Schema has been bundled and is used for runtime validation.
The author released a ComfyUI Video Builder fully local running tutorial, covering the entire workflow from portable version installation to Story Mode final output, including nodes, models, and local LLM configuration. The author actually tested that 16GB VRAM plus 64GB system RAM can run the entire pipeline; devices with lower VRAM can use short scenes, low resolution, and DMAD/Refine pipeline optimizations.
Stable Diffusion Art provides a set of ComfyUI workflows that chain three MiniMax H3 videos together to generate a 360-degree orbit bullet-time shot from a single photo.
Why it matters: Chaining three MiniMax H3 videos into one ComfyUI workflow can generate a bullet-time shot with a 360-degree orbit from a single photo.
CCS used RelayVSR 2× in ComfyUI to upscale an 8-second MiniMax H3 shot, finishing with DLSS 5, and compared the original and upscaled videos. Both versions are SDR, with a focus on the detail of the chainmail and helmet as the character walks. The author released the workflow in the first comment and mentioned the RelayVSR + VSR Decode nodes and model weights submitted by /u/Acrobatic-Example315.
This workflow runs on Google Colab GPU, does not rely on paid video generation APIs, uses Pika LoRA to generate an initial video, and then processes it with NVIDIA Open 2K to obtain a 2K video. The initial video is generated at 0.4MP resolution with 10 sampling steps, and Open 2K only needs 3 steps to output the final 2K video. Workflow link: https://open-gen-lab-477h.vercel.app/k
ComfyUI Comic Creator v1.69.1 update fixes a crash when generating with linked OCR and MOSS-Image tabs. It also resolves VRAM insufficiency caused by the OCR Chat TE function, adds bbox drawing selection and Ctrl+Z undo deletion, and updates the manual to the latest version.
ComfyUI Comic Creator v1.68.1 and VRM Pose Studio v0.2.0 updates strengthen integration; VRM Pose Studio now displays areas outside the preview output size as semi-transparent.
SnapRef v2a released as a stable version of the Anima reference adapter, adding per-reference weights and six workflows; evaluation is roughly on par with v1a. Installation requires placing snapref_v2a.safetensors into models/loras/ and using the SnapRef node instead of LoraLoader; the FP8 file is 195 MB, and under a 64-case two-seed evaluation, appearance label recall is 0.8722 vs 0.8727.
Why it matters: SnapRef v2a adds per-reference weights and six workflows, with evaluation on par with v1a; creators can adjust character consistency as needed based on this.